UV DTF Rolling Gang Sheet – Build Your Own

BUILD YOUR OWN UV DTF ROLLING GANG SHEET

Fill your sheet with as many designs as you can fit. UV DTF transfers give hard goods a vibrant, glossy, durable finish—no heat press needed.

Perfect for:

• Glass cups and tumblers
• Acrylic
• Hard plastic
• Metal
• Ceramic
• Other clean, smooth, nonporous surfaces

UV DTF is not intended for apparel, fabric, silicone, textured, porous, or flexible surfaces.

FILE REQUIREMENTS

• Upload high-quality, print-ready PNG files
• Transparent backgrounds are recommended
• Upload artwork at the exact size needed
• Do not mirror designs
• Leave a small amount of space between designs
• Small or extremely fine details may not transfer properly
• Colors may vary slightly between your screen and the finished print

Files print exactly as submitted. We do not resize, edit, remove backgrounds, correct spelling, or improve image quality unless an art service is purchased separately.

HOW TO APPLY UV DTF

1. Clean the surface thoroughly with rubbing alcohol and let it dry completely.
2. Use a squeegee or firm card to press across the transfer before removing it from the backing.
3. Slowly peel away the white backing, leaving the design attached to the clear transfer film.
4. Position carefully. UV DTF has a strong adhesive and cannot be repositioned after it touches the surface.
5. Starting on one side, slowly press the transfer onto the surface while smoothing firmly.
6. Burnish the entire design, paying special attention to small details and edges.
7. Slowly peel the clear transfer film away at a sharp angle. If part of the design lifts, place the film back down, rub firmly, and peel again.

CARE INSTRUCTIONS

• Allow 24–48 hours before washing
• Hand washing is recommended
• Do not soak or scrub the design
• Avoid abrasive cleaners
• Do not microwave
• Dishwasher durability varies by item, surface, and application

IMPORTANT: Test your specific item before a large production run. Surface coatings, texture, and handling can affect adhesion. Lovie T Designs is not responsible for incorrect application or compatibility with individual products.